Equipment

Click Here for the On-Line Store of TBI Products
 

The Chiro950® was first introduced in January 2008 to chiropractors. Since that date the equipment has been recognized as the standard for anti-aging treatments for this discipline.
Description
  • Custom Molded One Piece Durable Thermo Plastic Housing (White)
Features
  • On/Off Power Switch
  • LED indicator lights
  • Speaker/volume control
  • Facial/Body Intensity Controls
  • High/Low Battery Indicators
  • Automatic Wave Modulation Sequencer
    (A.W.M.S.)
  • Emits constant current through computer generator
  • Stainless Steel Facial and Body Wands
  • Built in Wand Tray
Power Requirements -Battery Operated
  • A/C Adapter
  • U.S. 2 Prong Plug Configuration
  • Input Voltage: 100 to 120 VAC 60 Hz
  • Input Current: 0.15 Amps
  • Charger - 6 Vdc at 1 am, center positive,
    decoax; enabling charger
  • Battery Rated 6 volt, 7 amp hr.
Power Supply
  • Output Plug: decoax; 5.5mm OD
    2.1mm Pin Receptacle
  • Voltage : 6 Vdc
  • Current:  1 amp
Output
  • Output Current: 800 uA Max from Constant Current Source
  • Complex Signal Frequency Range 3 Hz to 300 Hz
  • Voltage Maximum 30 Vpp on any output with respect to common; 5 Vpp typical


 


Forget the potential scratching and messy crystals.  Introducing the cool lush elegance and SAFETY of sterile saline.

*Great acne results
*Wrinkles, scars and pigmentation
*Deep delivery of serums and peels
*Quiet and powerful

 


Call for Quote of Packages

Model Chiro950
Dimensions Front 5.5 x 15.3 x 11.3 in
Rear  3.3 x 15.3 x 11.3 in
Weight 10 lbs.
Operating
Temperature
50F to 104F
10C to 40C
Storage
Temperature
-29F to 167F
-34C to 75C
Humidity
Range
0% to 95% noncondensing
Altitude
Range
-1000ft. to +15,000 ft.
The Model 950 includes

 1 - Face Wand on two separate leads with a single plug in and monitoring capabilities to determine open or closed circuit as reflected on LED panel

 1 - Body Wand on one single lead with a single plug in and monitoring capabilities to determine open or closed circuit as reflected on LED Panel

Recomended to use
only with MCR with DermaLastyl Conduction Gel
Available in 16 oz pump equipped bottles
Iontophoresis Process Use ONLY MCR with DermaLastyl Conduction Gel
with DermaLastyl P & S Clinical Grade Product

MP MCR 2100
Microcurrent and InfraRed
 

 

MP Model 2100 - Operates on standard household current and features two stainless steel short probes for microcurrent up to 1000 uA with Infrared.

Unit can operate as follows:
a.) Microcurrent Only
b.) Infrared Only
c.) Both Microcurrent and Infrared

Unit is recommended as effective alternative for use on post-Chiro950 treatments to further soften surface skin and promote even skin tone.

Microcurrent Measurements

1 Milliamp = 1,000 MIcroamps
1 Milliamp = 1 million nano- Amps
1 Millia amp = 1 billion pico-Amps


Sumishi being used at TBI Training Center
 

None of these units are classified as a medical device.  While patients may experience improvements, we make no claims regarding its effectiveness with headaches, sinuses, acne, skin disorders or other medical conditions.  Most states consider this form of micro-current safe and does not require a special license, however you should contact your state regulatory agency regarding technician credentialing to ensure you comply with state laws.


Find a Professional Near You


Copyright © 2004-2010, Chiro950, All Rights Reserved


Tel: 877.496.8838 Option "2"    Fax: 817.329.1828