MicroLightPro Model 7000 S The new TBI MicroLightPro Model 7000 offers, at a price every office can get started, a lost cost, small, high performance unit incorporating two modalities simultaneously!  This provides you an entry level device and along with our new natural super peptides and professional grade proprietary formulas you can get amazing results. So safe and simple you, your CA, your spouse or your new aesthetic consultant can use the unit the same day it arrives.

This new entry into the aesthetic market is particularly directed at chiropractors just adding anti-aging to their practice.  This small compact unit packs a lot of punch with functionality. * 11.5" deep, 8.5 " wide and 3" tall (without units at rest as shown) * Two 2 1/2" round applicator wand units - operates independently * Each wand has 24 individual microcurrent contact wands or a total of 24 negative/positive polarity combination when both applicators * LED Light Therapy includes 7 light spectrum with ability to run automatically and independently wands run through entire 7 * Manual Mode to select the same or different constant light spectrum * Pulse Light setting * Microcurrent from 100 Ua to 1000 with simple dial control * Effective for both face and body treatments * Each unit comes with 1 bottle of MCR with Dermalastyl quality skincare conduction gel. RED and near-infrared light are a "window" of wavelengths that are able to pass through tissue up to 1 inch deep. Red and near-infrared have beneficial effects on cells by "kick-starting" them into immediately creating more ATP (cellular energy) and increasing DNA and RNA activity. Photo-rejuvenation therapy is based on important research by NASA which shows that certain frequencies of light significantly increases new tissue growth, the synthesis of collagen and overall healing time after injury or surgery. Unlike laser resurfacing, photo-rejuvenation is non-invasive, causes no inflammation and requires no special post treatment procedures. It is proving to be an effective treatment for aging, sun damages skin as well as Rosacea and other skin conditions. NO RECOVERY TIME. Red LED treatments can be used on any part of the skin. They are especially effective for improving the appearance of the face, neck, and chest. BLUE Suitable for sensitive, oily and comedo skin.  Diminishes and eliminates acne bacilus to remove the acne.  Also tends to tighten saggy skin and jowls. Note: Together Red and Blue and Microcurrent promotes: -Reduces the effects of sun-damaged skin -Diminishes fine lines, wrinkles & crow’s feet -Reduces the number of blemishes, age spots -Minimizes large pores -Helps reduce redness and uneven skin tones -Restores skin’s natural collagen production -Increases circulation and moisture -Wide angle for face, neck, hands and body -Generates virtually no heat or harmful UV rays -No known side effects

ORANGE Indicated as a spectrum that can help whiten and brighten decompose pigment and smooth scars.

TURQUOISE: Has a calming on the skin, helps restore the skin's resistance to the sun damaged skin, helps release stress and is can be used on sunburn skin to help calm and heal.

White Effective in transdermal absorption of nutrients and protocol requiring penetration to the dermis level of the skin, such as TBI's new Collagen Transdermal treatment with new super peptide and 100% soluble Marine Collagen.

LED vs. LASER

Light Emitting Diodes (LED's) are another form of light therapy that is a relatively recent development of the laser industry. LEDs are similar to lasers inasmuch as they can emit the same light but differ in the way that the light energy is delivered.

Lasers are focused beam single-wavelength light emitters that can be intense enough (a 'hot' laser) to burn/cut tissue or 'cold' enough to only have light therapy effects. LEDs do not deliver enough power to damage the tissue, but they do deliver enough energy to stimulate a response from the body to heal itself. With a low peak power output but high duty cycle , the LEDs provide a much gentler delivery of the same healing wavelengths of light as does the laser but without the same risk of accidental eye damage that lasers do.

A significant difference between lasers and LEDs is the power output. The peak power output of LEDs and low level lasers are measured in thousandths of a watt, while that of “hot” lasers is measured in watts. However, this difference when considered alone is misleading, since the most critical factor that determines the average amount of energy delivered is the duty cycle of the device.

LED devices have a 85% duty cycle. That is, the LED pulse is ON for .85 seconds and OFF for .15 seconds, versus the .2 millionths of a second burst from a laser at 1 hertz, which is ON .0000002 seconds and OFF for .9999998 seconds. This is a .00002% duty cycle. In short, the LED diodes can emit at least 33% more 'average' energy than a comparable powered laser diode (Our LED’s produce a much higher level than this) because of the substantially longer duty cycle, even though the peak output is much less.

Moreover, LED's allow the light beam to spread out instead of being a pinpoint light beam and they generate a broader band of wavelengths than does the single-wavelength laser. The wide-angle diffusion of the LED confers upon it a greater ease of application, since light emissions are thereby able to penetrate a broader surface area. Moreover, the multiplicity of wavelengths in the LED, contrary to the single-wavelength laser, may enable it to affect a broader range of tissue types and produce a wider range of photochemical reactions in the tissue. If LED light disperses over a greater surface area, this results in a faster treatment time for a given area than laser. The primary reason that we chose the LEDs over lasers is that LEDs are safer, more cost effective, provide a gentle but effective delivery of light and a greater energy output per unit of surface area in a given time duration. Our units produce visible near-infrared red light at 650nm (nanometers).
 

This unit is not classified as a medical device.  While patients may experience improvements, we make no claims regarding its effectiveness with headaches, sinuses, acne, skin disorders or other medical conditions.  Most states consider this form of micro-current safe and does not require a special license, however you should contact your state regulatory agency regarding technician credentialing to ensure you comply with state laws.